Acom 06AT User Manual page 25

User's Manual | ACOM 06AT | Automatic Antenna Tuner and Switch
b) Assign the antenna numbers (1 to 4) in advance. After verifying that there is no dangerous
voltage, connect, one at a time, all available antenna cables to the respective antenna
sockets, ANTENNA 1 to ANTENNA 4 of the tuner, without fastening the connector rings at
first, so that the cables may still be axially turned and adjusted.
Lay out the cables in the necessary directions and secure them. Finally, fasten the rings of the coaxial connectors.
If you need additional binding points, affix the cables further, e.g., to other surrounding objects and walls.
c) Connect the RF coax from the radio station to the tuner socket labeled 50Ω RF +26 VDC
Power & Control in a similar way. If the distance to the radio station exceeds 30 m (100 ft),
we recommend using a RG213 type, an equivalent or a better cable. Lay out and attach the
input cable and fasten the connector ring.
October 2022 S e c t i o n INSTALLATION | Page 25 of 70