Wilson Electronics WILSONPRO ENTERPRISE 4300 Installation Manual page 12

In-building cell signal amplifier with frequency-specific outside antenna ports and lte connected remote monitoring

Hide thumbs Also See for WILSONPRO ENTERPRISE 4300:

(MENU SYSTEM - SETTINGS SCREEN cont.)

Cloud Communication Settings Tab

Note: The Reset Local Comm button (button name will likely change) is used in case the user

has configured the amplifier such that the Local Configuration Utility is not accessible, e.g.,

if the communication preferences are set to "LTE Only". The "reset" function will change the

communication preferences to "LTE Preferred w/Ethernet Backup". It will also reset the login

credentials for the Location Configuration Utility to factory defaults.

Antenna Settings Tab

Common Mode is configured from the Local Configuration Utility and should be set when

using a single Donor/Outside Antenna.

IN-BUILDING CELL SIGNAL AMPLIFIER

ENTERPRISE 4300 & 4300R

Table of Contents

Wilsonpro enterprise 4300r