Look Solutions COBRA 3.1 Operating Manual page 22

Fig. 21: Setting Timer Off time
By scrolling, the Off time for the timer can be configured in the third box (Fig. 21). The
time can be set between 10 seconds and 120 minutes.
By scrolling, the amount of fog (Fog Intensity) can be set in the fourth box (Fig. 22). The
setting is made as in the main screen in the manual area (Fig. 7, p. 14).
• Pressing < in the upper left corner returns to the previous screen without saving the
changes.
• Pressing ✔ saves the settings and returns to the main menu. The Timer is now selected
as the source.
If the Enable option is activated, the timer will start.
If the info area for the timer is tapped in the main menu while the timer is running, the
timer will be stopped.
If you tap on the info area again while the timer is stopped, the timer settings menu will
appear.
Please note that the selected pump characteristic has an influence on the fog quantity.
This means that even when manually set to 100%, less fog may be produced.
For more information, see section 5.6.1.
5. Operating the Cobra 3.1
Fig. 22: Setting Timer Fog Intensity
22