Telepen - Honeywell Voyager 1602g User Manual

Telepen

Telepen On/Off
Telepen Output
Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1
and decodes them as standard full ASCII (start/stop pattern 1). When Original
Telepen Output is selected, the scanner reads symbols with start/stop pattern 1
and decodes them as compressed numeric with optional full ASCII (start/stop pat-
tern 2). Default = AIM Telepen Output.
Telepen Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 1-60. Minimum Default = 1, Maximum Default = 60.
Minimum Message Length
Voyager 1602g User Guide
On
* AIM Telepen Output
(page 120) for additional information. Minimum and Maximum
<Default All Telepen Settings>
* Off
Original Telepen Output
Message Length
137