Operation - Rikon Power Tools 10-342EVS Operator's Manual

MAIN ON / OFF SWITCH
The 10-342EVS Wood/Metal Bandsaw has a
main on/off switch located behind the saw on
the side of the metal Inverter Box. FIG. 42. This
switch MUST be operated before and after the
saw is used.
It allows electrical access to the control box for
using the saw. It also totally shuts down the saw
when not in use for an extended time.
The switch protects the saw's electricals,
particularly the LCD display from burning out, and
prevents unwanted access by children or
bystanders. The switch will also hold a lock to
further secure the lathe from being activated.
CONTROL PANEL: ON/OFF SWITCH
In conjunction with the two speed pulley system, the
10-342EVS Wood/Metal Bandsaw also features a
variable speed switch.
To use within a specific belt speed range, simply turn
the bandsaw on (FIG. 43, A) and rotate the variable
speed dial (B) clockwise to increase the speed, and
counter clockwise to decrease the speed.
The blade speed will be indicated on the digital readout
display (C).
To stop the bandsaw press the large red button (D).
NOTE: Rotate the large red stop button clockwise to
reset the saw for next operation.
NOTE: The variable speed dial will only increase speed
to the highest speed shown depending on belt position.
FIG. 43.

OPERATION

C
B
A
D
21
AC INVERTER
CONTROL BOX
ON
OFF
FIG. 42
FIG. 43