Table of Contents
Advertisement
NATURAL GAS INSTALLATION
5. Connecting the appliance to a natural gas supply
•
The appliance shall be installed in accordance to
EN 498:2012 & EN484:2017
relevant local gas fitting rules.
•
Remove the fitted LPG gas bottle hose and
regulator from the adaptor mounted to the
semi-rigid appliance pipe
•
Connect the conversion kit hoses and natural gas
regulator. Ensure the flow arrow on the regulator points
towards the appliance
•
Carry out a leakage check on all connections
4. Adjust the turndown setting on the valve
NOTE: The final step in the conversion of the barbecue to
natural gas is the adjustment of the turndown setting.
•
Light each burner and rotate the control knob to the
lowest setting, then remove the knob from the valve
shaft.
•
Using a small flat-blade screwdriver adjust the
turndown adjustment screw to achieve a small steady
flame on the burner.
View with
knob removed
•
Replace the knob.
•
Recheck the operation of the burner
at the maximum and turndown.
•
Repeat procedures for all valves.
gas installations and any
Turndown screw
NATURAL GAS INSTALLATION
11
Advertisement
Table of Contents
