Related Manuals for Beef Eater 1500 Series
Summary of Contents for Beef Eater 1500 Series
- Page 1 1500 SERIES Assembly and Operating Instructions BUILT IN BDB1530GAE, BDB1540GAE & BDB1550GAE FOR OUTDOOR USE ONLY EUROPE BMAN_1500Series_Builtin_EU_Apr20...
-
Page 2: Table Of Contents
CONGRATULATIONS CONTENTS Dear customer, Important safety instructions ............3 Product description ..............8 Congratulations and thank you for choosing our barbecue. Product dimensions ..............9 We are sure you will find it a pleasure to use. Before you use the barbecue, we recommend that you read through the Gas specifications ...............10 relevant sections of this manual, which provide a description Installation warnings ..............11... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Please read the user manual carefully and store in a handy • Do not attempt to dismantle or adjust the control valves. place for later reference. • Do not attempt to dismantle or adjust the regulator. • Do not test for leaks with a naked flame. - Page 4 IMPORTANT SAFETY INSTRUCTIONS To the installer WARNING WARNING • For fixed installations, this appliance must be installed Failure to follow these instructions and observe the in accordance with local authority and any relevant warnings provided in this operations manual could result in statutory regulations.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS • Move the appliance during use. IMPORTANT TIPS & INFORMATION • Obstruct any ventilation of barbecue or the cylinder. Should the appliance go out for any reason, turn off all • Allow the flexible gas supply hose or any electrical cord control knobs and the cylinder gas valve.
- Page 6 GAS CYLINDER SAFETY INFORMATION Gas cylinders must be stored outdoors, out of reach of FIG 1 children and must not be stored in a building, garage or any Standard regulator other enclosed area. • This appliance is designed to be used with a gas cylinder not exceeding 9kg (20lbs) capacity.
- Page 7 LPG SAFETY INFORMATION LPG safety information • Use only gas cylinders, which meet national and regional codes. The minimum cylinder size for this barbecue is 6kg. Ensure that the cylinder can provide enough fuel to operate the appliance. If in doubt, check with your local gas supplier.
-
Page 8: Product Description
PRODUCT DESCRIPTION 4 burner built-in barbecue Warming rack Burner box Cast iron grill Support bracket and fasteners (purchase kit BAH70HS separately, needed for installation in BeefEater outdoor kitchen) Cast iron hotplate Control panel Vaporisers Flip down control panel cover Burners LPG hose and regulator Roasting hood Grease tray... -
Page 9: Product Dimensions
PRODUCT DIMENSIONS 584mm 654mm 538mm 3 burner Hood and flip down control panel cover closed 804mm 4 burner 974mm 710mm 5 burner Hood and flip down control panel cover open PRODUCT DIMENSIONS... -
Page 10: Gas Specifications
GAS SPECIFICATIONS Connecting the appliance to a LPG gas cylinder NOTES: • This appliance MUST be installed and serviced only • The appliance has a 9kg gas bottle regulator and hose by a qualified licensed person. already fitted. • This product is intended for outdoor use only. •... -
Page 11: Installation Warnings
INSTALLATION WARNINGS WARNING WARNING Choosing a location • This appliance shall only be used in an above ground, When planning the location and preparing the installation open air situation with natural ventilation without structure for this appliance note the following: stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind or natural •... -
Page 12: Mounting Enclosure Guideline
MOUNTING ENCLOSURE GUIDELINES Mounting enclosure dimensions when installed with Beefeater hanging bracket BA70HS 650mm min. 730mm 3 burner 604mm 880mm 4 burner Separation panel 40mm gap min. 1050mm 5 burner Gas bottle Rear wall/splashback to be venting slots Gas bottle non-combustible material venting slots Enclosure construction... -
Page 13: Assembling The Barbecue
ASSEMBLING THE BARBEQUE Tools required: Fasteners supplied (with hanging bracket kit) The barbecue can be mounted into the enclosure by using the M6 x 25MM BeefEater hanging bracket kit BA70HS or by resting the barbecue 8 OFF directly on its base. See step 1-4 for mounting of the hanging bracket kit. - Page 14 ASSEMBLING THE BARBECUE x 3, 4 or 5 ASSEMBLING THE BARBECUE...
- Page 15 ASSEMBLING THE BARBECUE...
- Page 16 ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
-
Page 17: Burner Removal And Fitting And Leak Test Procedure
BURNER REMOVAL, FITTING AND LEAK TEST PROCEDURE WARNING IMPORTANT After completing the gas hose connections, conduct a leak test following the leak test procedure before using the appliance. WARNING WARNING To ensure gas tight connections, complete the gas leak test procedure before and after gas hose connection and after every reconnection of the gas cylinder. -
Page 18: Operating Instructions
OPERATING INSTRUCTIONS Control functions Lighting instructions Before lighting the barbecue: • Do not attempt to light burners with the cooking surfaces covered • Check that all hoses and gas fittings are tight • Read instructions before lighting • Open the roasting hood •... -
Page 19: Cooking Methods
COOKING METHODS Direct cooking method Indirect cooking method This method of cooking requires the hood to be closed. This method of cooking can be done with the hood either closed or open. Indirect cooking involves little or no heat directly underneath the food. - Page 20 INDIRECT COOKING / ROASTING Reposition the grill plates You may find it useful to purchase a meat thermometer to help take the guess work out of cooking. To achieve the best heat circulation around the food, it is best Meats such as beef, lamb, veal and pork should be to remove the hotplate from the barbecue and position the about 70˚C/160˚F when medium.
-
Page 21: Cleaning And Care
CLEANING AND CARE Cleaning the Burners The cleaning and care instructions are essential for the proper functioning and operation of your appliance over time. • Check main opening of burner regularly for insect nests Failure to adhere to these care instructions may affect your (eg. -
Page 22: Technical Information
TECHNICAL INFORMATION TECHNICAL INFORMATION EUROPEAN SPECIFICATION 1500 SERIES 3 BURNER BBQ BE,CH,CY,CZ, BE,CY,DK,EE, AT,CH,DE,SK ES,FR,BG, GR, FR,GB,HU,IT, IE,IT,LT,LU, LT,NL,NO,SE, COUNTRY LV,PT,SK,SI SI,SK,RO,HR, TR,BG,IS,LU, MT,FI GAS CATEGORY 3+(28-30/37) 3B/P(30) 3B/P(50) GAS TYPE G31 PROPANE G31 PROPANE BUTANE PROPANE BUTANE BUTANE GAS INLET... - Page 23 1500 SERIES 5 BURNER BBQ BE,CH,CY,CZ, BE,CY,DK,EE, AT,CH,DE,SK ES,FR,BG, GR, FR,GB,HU,IT, IE,IT,LT,LU, LT,NL,NO,SE, COUNTRY LV,PT,SK,SI SI,SK,RO,HR, TR,BG,IS,LU, MT,FI GAS CATEGORY 3+(28-30/37) 3B/P(30) 3B/P(50) GAS TYPE G31 PROPANE G31 PROPANE BUTANE PROPANE BUTANE BUTANE GAS INLET 28 - 30 PRESSURE [mbar] INJECTOR 1.00...
-
Page 24: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE CHECK Barbecue will not light Ignition system not working Check to see visible spark at starter probe - if no spark is present when control knob is turned then the unit may need to be serviced or replaced. Contact your BeefEater dealer. -
Page 25: Notes
NOTES NOTES... - Page 26 NOTES NOTES...
-
Page 27: Warranty
WARRANTY Warranty FOR SALES IN EUROPE APPLIANCE: BEEFEATER INTEGRATED BARBECUE Should any part fail due to defective workmanship or faulty Conditions of Warranty materials within the specified period from the date of purchase, 1. The appliance is delivered to the BeefEater distributor’s service department BeefEater or its distributor will repair or, (at distributors option), or authorised service agent and freight charges both ways are paid by the replace the defective part free of charge. - Page 28 For more information on all Beefeater products, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website: EUROPE BeefEater Europe PO Box 1238 Cheddar BS27 9AH United Kingdom phone UK: +44 (0) 8455 436001 phone EU: +44 (0) 1934 743362...