Kärcher HDS 7/16 C Manual page 15

Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.
– Before first start-up it is definitely necessary to read
the operating instructions and safety indications Nr.
5.951-949.0!
– In case of transport damage inform vendor immedi-
ately.
– Check the contents of the pack before unpacking.
For scope of delivery see illustration 1.
Contents
Environmental protection
Danger or hazard levels
Overview
Symbols on the machine
Proper use
Safety instructions
Safety Devices
Start up
Operation
Storage
Transport
Care and maintenance
Troubleshooting
Warranty
Accessories and Spare Parts
Technical specifications
Environmental protection
The packaging material can be recycled.
Please do not throw the packaging mate-
rial into household waste; please send it
for recycling.
Old appliances contain valuable materi-
als that can be recycled; these should be
sent for recycling. Batteries, oil, and sim-
ilar substances must not enter the envi-
ronment. Please dispose of your old ap-
pliances using appropriate collection sys-
tems.
Please do not release engine oil, fuel oil, diesel and
petrol into the environment Protect the ground and dis-
pose of used oil in an environmentally-clean manner.
Notes about the ingredients (REACH)
You will find current information about the ingredients at:
www.kaercher.com/REACH
Danger or hazard levels
DANGER
Pointer to immediate danger, which leads to severe in-
juries or death.
WARNING
Pointer to a possibly dangerous situation, which can
lead to severe injuries or death.
CAUTION
Pointer to a possibly dangerous situation, which can
lead to minor injuries.
ATTENTION
Pointer to a possibly dangerous situation, which can
lead to property damage.
Figure 1
1
2
3
4
5
6
7
8
9
EN 1
10 High-pressure nozzle (stainless steel)
EN 1
11 Pouring vent for detergent
EN 1
12 Steering roller with fixed position brake
EN 2
13 Fuel sieve
EN 2
14 Safety lever
EN 2
15 Power supply
EN 2 16 Trigger
17 Tool bag
EN 3
18 Safety latch of the hand spray gun
EN 4
19 Trigger gun EASY!Force
EN 5
20 Pouring vent for fuel
EN 5
21 Dosage valve for detergent
EN 5
22 Operating field
EN 6
23 Storage for hand spray gun
EN 7
24 Step depression
EN 7 25 Handle
26 Nameplate
EN 8
27 Cover lock
28 Storage compartment for accessories
29 Burner
30 Recess for spray pipe
31 Cover
32 Fill opening for system care RM 110
33 Pressure/quantity regulation of the pump unit
34 Oil tank
35 Oil drain screw
36 Backflow valve of the detergent infeed
37 Detergent suction hose with filter
38 Fuel filter
39 Fastening clamp
40 Hose (soft damping system) of the water shortage
41 Water shortage safeguard
42 Sieve in the water shortage safeguard
43 Fine filter (water)
44 Float tank
Figure 2
A
0/OFF =
1
2
3
4
5
6
7
8
– 1
EN
Overview
Device elements
Support for spray lance
Manometer
Recess for detergent suction hose
Recessed grip (both sides)
Connection for water supply with filter
Water connection adapter
High-pressure connection EASY!Lock
High pressure hose EASY!Lock
Spray lance EASY!Lock
safeguard
Operating field
Power switch
Off
Operating mode: Cold water operation
Operating mode: Hot water operation (e = Eco
mode, hot water max. 60°C)
Indicator lamp rotation direction
"Ready for use" indicator lamp
Fuel indicator lamp
Indicator lamp service
Indicator lamp for detergent
Indicator lamp system care
15