Advertisement
Quick Links
Support and E-Warranty Certificate www.vevor.com/support
MULTI-FUNCTION VEGETABLE
CUTTER
INSTRUCTION MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VEVOR QTJ-J002
Summary of Contents for VEVOR QTJ-J002
- Page 1 Support and E-Warranty Certificate www.vevor.com/support MULTI-FUNCTION VEGETABLE CUTTER INSTRUCTION MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
- Page 2 CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
- Page 3 Before operating this device, please read this instruction manual completely and keep it handy for future reference. Important Assurance Always follow basic safety precautions when using these devices. These include: 1.The device should not be used with children. There are very sharp blades on the device.
- Page 4 WARNING Sharp Blade Hazard:Blades are sharp and can cause cuts. To avoid injury from sharp blades,handle with care. QTJ-J002 Schematic Diagram: - 3 -...
- Page 5 Configuration A: 1/4inch,Installed on the product 2pcs Brush Gloves 1couple Configuration B: 3/8inch,Installed on the product 2pcs Brush Gloves 1couple Configuration C: 1/4inch,Installed on the product 1/2inch 3/8inch 6pcs 1/4”*2 1/2”*2 3/8”*2 6-valve Brush Gloves 1couple Tray Operation Guide: View QTJ-J002X for operating guidelines. - 4 -...
- Page 6 QTJ-J002X Schematic Diagram: Configuration A: 1/4inch,Installed on the product 2pcs Brush Gloves 1couple Configuration B: 3/8inch,Installed on the product 2pcs Brush Gloves 1couple - 5 -...
- Page 7 Configuration C: 1/2inch,Installed on the product 2pcs Brush Gloves 1couple Configuration D: 1/4inch,Installed on the product 1/2inch 3/8inch 6-valve pit removal 6pcs 1/4”*2 1/2”*2 3/8”*2 Brush Gloves 1couple Operation Guide: 1. Open the package, remove the equipment, and remove the fixing material on the package. 2.Place the handle in the corresponding position and insert the fastening pin for fixation ,as shown in the figure.
- Page 8 4.The equipment blade set is comprises a blade plate and food-pushing block. When changing the blade set, it is necessary to replace the blade plate and food-pushing block at the same time. The device can be equipped with 4 different striping specifications and cutting block blade sets.
- Page 9 3.The vibration-damping pad on the guide rod was removed, and the blade plate was removed from the guide rod. 4. Prepare the required blade plate, and in the same way, successively install the blade plate and pressure head (note: the blade mouth is facing upwards).
- Page 10 Configuration : 6-valve,Installed on the product 1/4inch 3/8inch 6-valve pit removal 4pcs 1/4”*2 3/8”*2 Brush Gloves 1couple Wrench Operation Guide: 1.Open the package, remove the equipment, and remove the fixing material on the package. 2.Fix the mounting plate with the accessory package screw on the base, as shown in the figure, and tighten the screw.
- Page 11 strips can be cut into buttons by placing them in the blade again for secondary cutting. 7.Pattern blade is selected for fruit cutting, such as apples, oranges, pears and other melon and fruit 6 leaves, 6 leaves and pit removal and other cutting.
- Page 12 1/4inch,Installed on the product 3/8inch 6-valve 6-valve pit removal 4pcs 1/4”*2 3/8”*2 Brush Gloves 1couple Tray Wrench Operation Guide: 1.Open the package, remove the equipment, and remove the fixing material on the package. Place the flat table as shown, check whether the four feet are flat, and adjust the four anti-slip adjustment foot pads.
- Page 13 press. 5.The equipment blade set is composes a blade plate and food-pushing block. When changing the blade set, it is necessary to replace the blade plate and food-pushing block at the same time. The device can be equipped with 4 different striping specifications and blocking blade sets. 6.Grid blade is selected to cut: cucumber, radish, potatoes, onion, pepper, fungi, scallion, and other ingredients for stripping and dicing.
-
Page 14: Clean And Maintenance
blocks on the upper compression cover, and remove the food pushing block; then load the prepared food pushing block back according to the position and place it aside. 4. According to the figure, the vibration damping pad on the guide rod is removed upwards, and the cutter head is removed upwards in parallel. - Page 15 specification for replacement (Improper operation or cutting too hard ingredients will also damage the blade). 4.The equipment use an ultra-thin blade and cannot cut tough foods like meat and sweet potatoes. 5.The equipment must be lubricated regularly. 6.If it cannot be pressed when cutting, it indicates that the cutter plate has been worn and changed.
- Page 16 Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the QTJ-J002 and is the answer not in the manual?
Questions and answers