Table of Contents
Advertisement
Locomotive basics
Locomotive switch locations
T
he functions of your locomotive's switches are outlined below. Refer to Figure 4 for the location
of the switches. The instructions below are specific to this particular locomo-
tive; note that available features (and switches) may differ from other loco-
motives and locomotive sets.
Smoke Unit Switch (SMK/NO SMK)
Used to turn the smoke unit function on and off. Be sure that track power is off when you throw
the switch
Program-Run Switch (RUN/PGM)
Used to assign an ID# and to reprogram the locomotive for LEGACY and Command operation
when the switch is in the PGM position. Also used to "lock" your powered locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the PGM position.
Remove rooftop hatch
Figure 4. Locomotive switch locations
Smoke unit switch
Volume control knob
Program-Run switch
9
REAR
Advertisement
Table of Contents
