Sanyo ECD-T1820 Operating Instructions Manual page 9

BASSXPANDER
Press the SND button  for more than 1.5 second to switch ON/OFF of the BASS mode. When the BASS
mode is on, "bASS" is displayed and the bass enhances.
RADIO SELECTION BUTTON (BND)
Press the BND button  to switch from CD player mode to radio.
Each time the button is pressed, the function changes as shown below.
FMI FMII
CD OR AUX SELECTION BUTTON (CD/AUX)
Press the CD/AUX button  to switch from radio mode to AUX or CD player mode.
CLOCK BUTTON (CLK)
Press the CLK button  to switch between the clock and audio display. When an audio function is
performed while the time display is selected, the audio display will appear for 5 seconds, then the display
will return to the time mode.
TO CANCEL THE BEEP TONES
Turn off the power by depressing the POWER button
.
1
To cancel all beep tones, press the POWER button
and the
2
3 seconds and then "bP : oF" is displayed.
To turn on the beep tones again, perform the same procedure. The beep tones are set and "bP : on" is
3
displayed.
DEMO MODE ON/OFF
Turn off the power by depressing the POWER button
.
1
To turn ON/OFF the demo mode, press the POWER button
and the
2
more than 3 seconds.
DEMO ON : Demo is displayed.
DEMO OFF : Display is OFF.
(DEFAULT : DEMO ON)
........................................................ 3
FMIII
AM
............................................. 6
............................................... 1, 8
........................... 4
............... 5
................................. 1, 7
button  simultaneously for more than
-8-
button  simultaneously for