With cd changer control full panel detachable high power fm/am stereo receiver compact disc player with cd changer controller iso mounting with removable trim ring (26 pages)
Summary of Contents for Sanyo ECD-T1560
Page 1
ECD-T1560 SIRIUS SATELLITE RADIO OPERATING MANUAL VOLUME A-Z/0-9 LOC/S-MOD Motorized Stealth Panel High Power FM/AM Stereo Receiver Compact Disc Player/MP3 Player/With ESP ISO Mounting with Removable Trim Ring Sirius Function Remote Control CD-R/RW Compatibility (English) SIRIUS OPERATION……………. 2~3 P.SCN/MP3 AS/PS...
Page 2
P .SCN/MP3 AS/PS DISC button (3) to select the channel up or down. seconds until the corresponding preset button number appears. Repeat steps 1. and 2. to program additional stations. 50W x 4 LOUD/ENT/ENT BAND ECD-T1560 MANU/SKIP/CH AUX IN DISC...
Page 3
SIRIUS MODE SELECTION ...…...…….…..(5) Press LOC/S-MOD button (5) to switch Category mode, Skip mode or normal. It is used as the selection of each: Normal Category mode When Category mode or Skip mode is engaged, the “CATEGORY” or “SKIP” function is turned on in the display.
Page 4
ECD-T1560 VOLUME A-Z/0-9 LOC/S-MOD Motorized Stealth Panel High Power FM/AM Stereo Receiver Compact Disc Player/MP3 Player/With ESP ISO Mounting with Removable Trim Ring Sirius Function (see separate booklet on Sirius Radio operation) Remote Control CD-R/RW Compatibility (English) OPERATING INSTRUCTIONS……………. 2~27 P.SCN/MP3...
If servicing is required, return the unit to an authorized SANYO mobile audio dealer. • Use the Controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • Changes or modifications not expressly approved by SANYO may void the user’s authority to operate this equipment.
COMPACT DISC CARE Dirt, dust, scratches and warpage can cause deterioration in the sound or intermittent skipping some tracks during play. TEXT Recommended CD-R/RW Media Data may not be properly written to CD-R/RW media depending on the quality of the media. If this happens, the data may not be reproduced correctly.
DIGITAL DISPLAY CD-IN indicator Channel name indicator CLASSIC Channel name ROCK Radio Frequency, Time, CD Track Number, Audio Control Selected Mode Stereo Local Category Mono Skip Artist Loud Subwoofer Song title...
USING THE FRONT PANEL 1. When the ignition key is switched to “ACC ON”, the panel of the unit will change from State 1 to State 2, the hidden panel will turn up. 2. Press (power) button to turn on the unit. Then press (eject) button, the panel will turn down to horizontal position (see State 3).
CAT/DIR P .SCN/MP3 AS/PS DISC DISC button (1) to turn off the unit. (Treble) (Balance) (Fader) Adjustment Range BAS –10 BAS 10 TRB –10 TRB 10 BEEP ALL BEEP OFF 50W x 4 LOUD/ENT/ENT BAND ECD-T1560 MANU/SKIP/CH AUX IN...
Page 10
e.g. When preset button is pressed. When BAND/LOUD/ENT button is pressed. When AS/PS/P.SCAN/MP3 button is pressed. BEEP ALL mode: The beep is generated when every button is pressed. BEEP OFF mode: The beep is disabled. MODE SELECTION...……..…...(4) Press MOD/SW button (4) to choose desired listening mode. (e.g. radio mode to SIRIUS mode to CD (MP3) mode to CDC (or AUX) mode) SUBWOOFER FUNCTION...…...…...(4) Press MOD/SW button (4) for several seconds to toggle sub-woofer output.
P .SCN/MP3 AS/PS DISC button (3) shortly to activate automatic seek function. in memory. seconds until the corresponding preset button number appears. Repeat steps 1. and 2. to program additional stations. 50W x 4 LOUD/ENT/ENT BAND ECD-T1560 MANU/SKIP/CH AUX IN DISC...
Page 12
• Quick tuning ... Select the desired band, then press one of the six preset buttons (5). LOCAL/DISTANT SELECTION ...…..(6) Press LOC/S-MOD button (6) to set local or distant stations. Use local position (LOC appears on the display) for reception of strong station, and distant position (DX appears on the display) for reception of weaker stations.
MANU/SKIP/CH 50W x 4 LOUD/ENT/ENT BAND ECD-T1560 MANU/SKIP/CH AUX IN DISC button (8), the panel will change button (3) for several...
Page 14
Notes: • Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. • You cannot play CD-R/ CD-RW that is not finalized. (A finalize process is necessary for a recorded CD-R disc to be played on the audio CD player.) PLACING THE CD IN PAUSE MODE ...
Press the MOD/SW button (1) with the power on to select CDC mode. When the CDC mode is switched on, playback begins with the first CD that the CD changer detects. (Note: Unit will only go to CDC mode if the SANYO CD changer is connected.) SKIPPING TRACKS ...…(2)
Page 16
To cancel the track shuffle or disc shuffle mode, press the SHF button (6) again. SELECTING A DISC... (7),(8) Press the DISC- button (7) to select the preceding disc. Press the DISC+ button (8) to select the next disc. Note • Use with only SANYO CD Changer.
(6) or CAT/DIR downward. CAT/DIR P .SCN/MP3 AS/PS DISC or MANU/SKIP/CH button (7) to select directory upward or 50W x 4 LOUD/ENT/ENT BAND ECD-T1560 MANU/SKIP/CH AUX IN DISC button (8), the panel will change button (10) to advance or reverse...
Page 18
Select by AS/PS/P.SCN/MP3 button: When pressed AS/PS/P.SCN/MP3 button ( “Searching track directly” => “Searching Directory or File Name”=> searching from root by VOLUME A-Z/0-9 dial (4)=>searching from current directory by VOLUME A-Z/0-9 dial (4) SEARCHING TRACK DIRECTLY...………..…(3),(4),(5) Press the AS/PS/P.SCN/MP3 button (3) one time to enter into “Searching track directly” mode.
Page 19
PAUSE...……………………………………….(11) Press PAU button (11) to pause MP3 player. Press it again to resume play. REPEAT THE SAME SONG...……………….(13) Press RPT button (13) to continuously repeat the same song. Press again to cancel repeat function. SCAN...………………………………………….(12) The scan function enables you to listen to the first few seconds of the song. Press SCN button (12) to activate/deactivate scan function.
In this way, you can switch between playing CD audio tracks and MP3 songs repeatedly. CAT/DIR P .SCN/MP3 AS/PS DISC button (1) or CAT/DIR button (2) again, it will start to play the CD 50W x 4 LOUD/ENT/ENT BAND ECD-T1560 MANU/SKIP/CH AUX IN DISC button (2), it button (1) or CAT/DIR button (2)
(MP3, portable cassette player, etc). Press the MOD button (1) with the power on to switch from radio mode or Sirius mode or CD (MP3) mode to AUX mode. CAT/DIR P .SCN/MP3 AS/PS DISC 50W x 4 LOUD/ENT/ENT BAND ECD-T1560 MANU/SKIP/CH AUX IN DISC...
Page 22
ERROR SIGNS If a problem should occur while operating the CD player, one of the following error signs may be displayed. Refer to the table below to identify the problem. DISPLAY ERROR 1 MECHANISM ERROR ERROR 2 SERVO ERROR If a problem should occur while operating the CD CHANGER player, one of the following error signs may be displayed.
POWER SEEK MODE 5.SEEK 6. SEL 7. BND 8. MODE 50W x 4 LOUD/ENT/ENT BAND ECD-T1560 MANU/SKIP/CH AUX IN DISC REMOTE IR SENSOR (BLACK) WIRE REMOTE SOCKET...
10 seconds, the player will reload the disc to prevent damage. • Servicing Should a problem develop, do not open the unit or try to repair it yourself. If servicing is required, bring the unit to a Sanyo Authorized Service Center.
TROUBLE SHOOTING Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with the unit. Before having the unit serviced, refer to the troubleshooting chart below. Symptom The compact disc The volume control is turned down. does not play when inserted into...
ACCESSORIES AND HARDWARE INSTALLATION Mounting Bracket (Half Sleeve) X1 Removable Trim Ring INSTALLATION 1. BEFORE INSTALLATION When mounting the unit in a car, keep the unit as level as possible. If the unit must be mounted at an angle, due to the design of the vehicle, make sure the unit does not tilt by more than 30 Mounting Strap and Screw X4...
2. INSTALLATION PROCEDURES When mounting the unit into a DIN–standard cutout (182x53 mm) in the dashboard or console, attach the provided Removable Trim Ring to the unit. 1. Insert the mounting bracket into the DIN-standard cutout (182x53 mm) in the dashboard or console.
ELECTRICAL CONNECTIONS WIRING Antenna Socket REMOTE IR SENSOR Power Antenna/Amplifier Turn On (Blue/Red) Ground Wire (Black) +12V Constant Power Supply (Yellow) +12V Accessory/Switched (Red) 2-SPEAKER SYSTEM (GREEN/BLACK) Rear Left (GREEN) Speaker (WHITE/BLACK) Front Left (WHITE) Speaker (GRAY/BLACK) Front Right (GRAY) Speaker (VIOLET/BLACK) Rear Right...
4. Ground Wire (Black) • Connect this wire to the vehicle chassis. 5. Power Antenna/Amplifier Turn On (Blue/Red) • Connect this wire to the control terminal of a Power Antenna or an external amplifier. • When not using a Power Antenna or an external amplifier, this wire is not connected. 6.
Page 30
MODEL ECD-T1560 LIMITED WARRANTY In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
Page 31
21605 Plummer Street Chatsworth, CA91311 ECD-T1560. Issue Number 1. Printed in Hong Kong...