Accessories And Hardware; Installation - Sanyo ECD-T1820 Operating Instructions Manual

ACCESSORIES AND HARDWARE

Mounting Bracket
(Half Sleeve) x 1
Removable Trim Ring

INSTALLATION

1. BEFORE INSTALLATION
When mounting the unit in a car, keep the unit as level as possible.
If the unit must be mounted at an angle, due to the design of the
vehicle, make sure the unit does not tilt by more than 30°.
Rear Strap
(Brace) x 1
Unlock Levers
x 1
Screw M5 x 14
x 2
-18-
Hex bolt M5 x 8
x 1
Screw M2 x 8
x 1
x1