With cd changer control full panel detachable high power fm/am stereo receiver compact disc player with cd changer controller iso mounting with removable trim ring (26 pages)
Full panel detachable
fm stereo/mw receiver
compact disc/mp3-cd player
with cd changer controller
with remote controller
iso mounting with removable trim ring (35 pages)
Fold down design full panel detachable fm stereo/am receiver auto reverse cassette player compact disc player with cd changer controller iso mounting with removable trim ring (61 pages)
Summary of Contents for Sanyo T1443 - ECD Radio / CD
Page 1
OWNER'S MANUAL ECD-T1443 Mobile Audio System • PLL Synthesizer Stereo Radio • Digital Compact Disc Player • Automatic Memory Storing • Fold Down Full Detachable Panel • Preset Equalization • Full Function IR Remote Control • AV / Auxiliary Input •...
CONTENTS Installation .....................3 DIN Front-Mount (Method A) ..................3 Installing the unit ....................3 Removing the unit .....................4 DIN Rear-Mount (Method B) ...................4 Using the Detachable Front Panel ................5 Wiring Connection ..................6 4 x 40W System......................6 Operation .......................7 General Operation ....................7 Radio Operation......................8 CD Operation ......................9 MP3 Operation .....................10 Remote Control Handset ..................12...
INSTALLATION Notes: DIN FRONT-MOUNT (Method A) • Choose the mounting location where Installing the unit the unit will not interfere with the normal activity of the driver. • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly.
INSTALLATION Removing the unit Fastening the unit to the factory radio mounting bracket. 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted), and tighten the screws at 2 places on each side.
USING THE DETACHABLE FRONT PANEL To Detach the Front Panel To Reinstall the Front Panel 1. Press the open button (OPEN), to 1. Push the front panel into the main make the front panel fold down. body. A ‘click’ sound should be heard.
WIRING CONNECTION 4 x 40W System MAIN UNIT ANTENNA CONNECTOR IGNITION SWITCH (B+) YELLOW MEMORY BACK-UP BLACK (GREY) GROUND (B–) Rch RED REAR RCA CABLE BLUE POWER Lch WHITE ANTENNA WHITE GREY FRONT Lch FRONT Rch SPEAKER SPEAKER GREY/BLACK WHITE/BLACK GREEN VIOLET REAR Lch...
OPERATION 15 25 10 26 27 GENERAL OPERATION • SOUND ADJUSTMENT Press SEL button (10) shortly to select • ON/OFF/ILLUMINATE the desired adjustment mode. Switch on the unit by pressing any The adjustment mode will change in button (except OPEN button (7) and the following order: EJECT button (4)).
OPERATION • LOUDNESS • RESET Press BND/LOUD button (13) to increase Reset button (27) can be activated bass output and display will show “LOUD”. with either a ball point pen or thin metal Press it again to release this function. object.
OPERATION • AUTOMATIC MEMORY • PLAY ALL TRACKS IN RANDOM STORING & PROGRAM SCANNING During CD operation, press SHF - Automatic Memory Storing button (22) to play all tracks on CD in Press AS/PS button (18) for several random order. Press again to cancel seconds, the radio searches from the function.
OPERATION MP3 OPERATION If the ID3 tag is not available, one of these words will be displayed. Unknown Songname, Unknown Artist, No Album During MP3 operation, the buttons Title, Unknown Year, No Comments, mentioned below serve the following NO ID3 TAG. functions: 1.
Page 11
OPERATION Note: • For a non-MP3 file, even though the file name extension is “.MP3”, the unit A. Notes on discs: will not recognize it. • Attempting to use non-standard shape discs (e.g. square, start, heart) may D. Notes on multi session disc: damage the unit.
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions : 178 (W) x 165 (D) x 50 (H) Tone Controls : ± 10 dB - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) Maximum Output Power : 4 x 40 Watts Current Drain...
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition switch is If the power supply is properly not on.
Page 15
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
Page 16
21605 Plummer Street Chatsworth, CA91311 ECD-T1443. Issue Number 1. Printed in Hong Kong 88-C1360-15...