JinkoSolar JKM565N-72HL4-V Installation Manual page 14

Middle modules installation
Figure 4: PV module installed at the side with Clamp fitting method
Clamp type
End Clamp
(40 mm thickness)
End Clamp
(35 mm thickness)
End Clamp
(30 mm thickness)
Middle Clamp
(40 mm & 35 mm
thickness)
Middle Clamp
(30 mm thickness)
Table 3: Mechanical dimensions, specification and material when modules installed with mid Clamp
When installing modules using clamps on the long side of the frame, the applicable product types and
installation locations are shown in figure 5 and table 4.
When installing modules using clamps on the short side of the frame, the applicable product types and
installation locations are shown in figure 6 and table 5.
When installing modules using clamps on the long side & short side of the frame, the applicable product
Fringe modules installation
Dimension(mm)
39 x 50 x 42
39 x 60 x 42(For 1.5mm thickness frame)
41.5 x 50 x 40
41.5 x 50 x 35
42 x 50 x 28
42 x 60 x 28(For 1.5mm thickness frame)
Q R
13.5 15
42 x 50 x 29.5
Q R
14 14
-12-
Composition
material
Aluminum-alloy
P
2.5
P
3