JinkoSolar JKM565N-72HL4-V Installation Manual page 12

Table 1: Mechanical dimensions for bolt fitting method（four mounting holes）
Note： The installation method of bolt fitting （four mounting holes） is based on the internal results in Jinko.
The load described in this manual is the design load. When calculating the maximum test load, 1.5 times of
safety factor should be considered.
2.3.1.2 Mounting with Bolts（NEXTracker four mounting holes）
Figure 3: PV module installed with bolt fitting method (NEXTracker)
Module type
72P
78P
Table 2: Mechanical dimensions for bolt fitting method (
Group 73 & 82
Group 83 & 84
Group 87
Height of the frame（mm）
JKMxxxM-72-V
JKMxxxM-72H
JKMxxxM-72H-TV
JKMxxxM-72HL4-V
Height of the frame（mm）
JKMxxxM-78H-V
JKMxxxM-78H-TV
JKMxxxM-7RL3-V
JKMxxxM-7RL3-TV
JKMxxxN-78HL4-V
/
/
2465*1134
Module dimensions(mm)
A*B
40
1956*992 & 1979*1002
1987*992 & 2008*1002
1987*992 & 2008*1002
2274*1134*35 & 2278*1134*35
30
2167*998 &
/
2166*1002
/ 2194*1008
/ 2182*1029
/ 2205*1032
2465*1134 2465*1134
-10-
2393*1130 & 2385*1122 &
2408*1132 & 2411*1134
2465*1134
2465*1134
Maximum
designed
mechanical
load and
Method of
30
installation
（400mm）
+1067/-1067
+1067/-1067
+1067/-1067
+1400/-1400
35
+1600/-1600
+1600/-1600
+1600/-1600
+1600/-1600
+1600/-1600
)
NEXTracker