Table of Contents
Advertisement
3.
Lift each of the print cartridges out of the printer and place them in a safe place
away from direct sources of heat and light.
The green image drum surface at the base of each cartridge is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes. If the Print Cartridge
needs to be out of the printer for longer than this, please wrap the
cartridge inside a black plastic bag to keep it away from light.
Never expose the drum to direct sunlight or very bright room
lighting.
4.
Locate the two fasteners (a) at each side of the belt and the lifting bar (b) at the
front end.
5.
Turn the two fasteners 90° to the left. This will release the belt from the printer
chassis.
6.
Pull the lifting bar (b) upwards so that the belt tilts up towards the front, and
withdraw the belt unit (c) from the printer.
CAUTION!
a
c
b
Maintenance > 65
a
Advertisement
Table of Contents
