Symbol Explanation - Nakayama MB2100 Manual

EN
away from heat and fuels.
• Design of the connection cable according to IEC 60245 (H 07RN-F) with a core cross-profile section of at least 1.5 mm2 for cable lengths up to 25m
2.5 mm2 for cable lengths over 25m

Symbol explanation

On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations.
Familiarise yourself with them to reduce hazards like personal injuries and damage to property.
V~: Volt, (alternating voltage)
Hz: Hertz
W: Watt
/min or min : Per minute
-1
mm: Millimetre
kg: Kilogram
dB(A):
Decibel (A-rated):
m/s²: Metres per second squared
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear protective, slip-resistant footwear.
Do not expose the product to rain or wet con-
ditions (moisture).
Manufacturing date code; year of manufactur-
yyWxx
ing (20yy) and week of manufacturing (Wxx)
Work across the slopes, never
up and down.
9
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear tight-fitted protective clothes.
Switch the product off and disconnect it from the power supply
before assembly, cleaning, adjustments, maintenance, storage and
transportation.
Cutting device continues to rotate after the product is switched off.
Wait until all machine components have completely stopped be-
fore touching the product.
Keep supply flexible cord away from cutting
device.
WWW.NIKOLAOUTOOLS.GR