Pause In The Process Of Baking; Demo Function; Child Lock - EAS Electric EMV48DTN Instruction Manual

Press " " and "
and 180ºC will appear on the screen.
- Press " " to set baking time , use "
time (89 minutes and 59 seconds can be set as maximum)
- Press " " again to set delay time, the delay time symbol "
further information about delay time setting, see point 'Delay Time Setting')
- Press " " to set temperature, use "
desired temperature.
- Press " " to start baking
Notice: The delay time is the continuation of clock time. For example, if the
current time is 10:00 and you want the appliance start working after 2 hours, you
should set delay time at 12:00, Press the "
7.4 Delay time
When " " is pressed to define a delayed start time the corresponding light
starts to blink. The screen shows the current time "AUTO". Press "
to set hours. Press "
Press " " to confirm the delayed start time. After pressing "
appliance starts working. Screen shows the delayed start time, Auto and the
current time alternately when the appliance is in standby.
Press " " for 1 seconds if you want to cancel the selected function.

7.5 Pause in the process of baking

Stop baking and change the parameters
Press the " " start/pause button, can be in baking process stop baking, at this time
can be adjusted in the process of baking time and temperature.
Press " ", enter the function menu selection mode and choose a function.
Press the " " baking time set key, then press "
Press the " " adjust function keys to switch to baking temperature setting mode;
Press " " to continue baking.
End baking and cancel the program
At each function after baking, the oven will emit a signal consisting of three beeps,
which will beep 3 times and the display will show "END". At 30 second intervals every
5 minutes the beep will sound 3 times and the display will show "END" flashing, 5
minutes later the oven will go into standby, or press "
In the configuration menu or during the cooking process, press "
stop the appliance and enter standby mode, then press "
appliance. The display will only show

7.6 Demo function

With the oven in standby state, press and hold "
show OFF SHO, meaning the demo function is inactive. Press "
activate the demo show (ON SHO) or deactivate it again (OFF SHO). Demo
function is mainly convenient for sales personnel, but for normal use of the oven,
it should be set to OFF SHO. Set this parameter according to your need, then
press " " return to the initial oven standby mode.

7.7 Child Lock

Lock: In waiting state, press "
entering into the children-lock state and "
lock, screen will always display "Block" for 3 seconds, and then return to the previous
interface.
" to select the desired function, "
" again to set minutes, use "
" for 3 seconds, there will be a long "beep", denoting
" and " " to increase or decrease baking
" and " " to increase or decrease the
" key waiting for confirmation.
" and "
" and "
" to enter standby mode.
.
" and "
" indicator will light up. In any case after
7
", " " will light up, 30:00
" will light up (For
" and "
" to set minutes.
" again, the
" to set the cooking time.
" for 1 second to
" to switch off the
" and the display will
" and "
"
" to
V.2