Safety Precautions - EAS Electric EMV48DTN Instruction Manual

We recommend that you read the instructions in this owner's manual carefully
before use for the best performance and to extend the life of your appliance, as it
will provide you with all the instructions you require to ensure its safe installation,
use and maintenance. Always keep this owner's manual close to hand since you
may need to refer to it in the future. Thank you.

1. SAFETY PRECAUTIONS

 In order to avoid bump against people or oven when carrying the
oven, please grip the hand shank on the two external side. Do not
carry in the shake hands handle place. This might damage the
oven.
 To ensure your safety all electric appliance should only be installed
or service by qualified staff. If the supply cord is damaged, it must
be replaced by the manufacture, its service agent or similarly
qualified staff in order to avoid a hazard.
Do not place supply cord on the edge of table and counter, or

touching heated appliance.
 In order to avoid electric shock, do not immerse supply cord, plug
or other parts into water.
Do not place the production near electric stove, heated oven,

microwave or other heat source.
 In order to avoid burn or explosion, combustibles (curtains, cloth,
wallpaper and others) or packaged and canning should be
removed.
 Do not place paperboard, plastic or other similar items in the oven.
When the oven is not be used, everything should be removed
except provided accessory.
 Do not cover slag pan or other parts with tinsel since it will result in
overheat.
 Accessible parts may become hot during use, children should be
kept away.
 Never obstruct vents provided for ventilation and heat dispersal.
 The ends of door handle may become hot during use, so please grip
the middle parts.
Disconnect the oven from the power supply before cleaning or

maintenance.
 When your oven is fault, please send it to nearest service agent to
examine, repair or adjust.
 Take insulation special gloves to carry ovenware or handle oil plate.
 Disconnect the oven from the power supply and waiting until it is
cool, before cleaning.
 In order to avoid electric shock, please never use wiry brush to clean
since pieces of metal is easy to touch live part.
Never use metal scouring pads or sharp scrapers which will

damage the door surface, and leading to glass broken.
 In order to avoid burn or electric shock, never putting too much
food or metal utensils.
3
V.2