Viewing Logical Unit Properties; Deleting Logical Units - HP StorageWorks 2000s User Manual

(from the Active Sessions tab) and then log on (from the Available Targets tab). This
will temporarily disconnect the host.
NOTE: In order for an existing host to access this newly assigned LU, you will have to take
operating system-specific actions in order for the host to see the new storage. For
example, with Windows you must rescan disks via the system's Computer Management
(available through the Control Panel). You will then need to write a signature, create a
partition, and format the drive so that the host can use it.

Viewing Logical Unit Properties

You can view the configuration of a LU or change the LU's name. To do this:
1. On the Logical Units screen, click the checkbox to the left of the LU whose properties
you want to view.
2. Click Properties.
3. If you want to change the LU's name, type a new name in the box and click OK.

Deleting Logical Units

You can delete one or more LUs. All data on the LU will be deleted and the space occupied
by the LU will become available for a new LU.
NOTE: You should not delete a LU if a host is attached to it.
To delete a LU:
1. On the Logical Units screen, click the checkbox(es) to the left of the LU(s) you want to
delete.
2. Click Delete.
3. Click OK to confirm the deletion.
HP StorageWorks iSCSI Feature Pack User Guide
18