Hill Start Control - BMW R 1200GS 2016 Rider's Manual

erate only to the cruising speed
saved in memory, even though
you might have intended slowing
to a lower speed.
Indicator lamp for cruise-
control system lights up.
Switch off cruise-control
system
Push switch 1 to left.
The system is deactivated.
Button 2 is locked.

Hill Start Control

with Hill Start Control
Using Hill Start Control
Requirement
The motorcycle is stopped.
ATTENTION
Switching off the engine or
ignition, folding out the side
stand, timeout (approx. 20
minutes) or in the event of a
fault
Hill Start Control brake failure
It is imperative to secure
the motorcycle by manual
braking.
NOTICE
Hill Start Control is only a con-
venience system for easier hill-
starting and should, therefore,
not be confused with a parking
brake.
OE
Apply brake lever 1 firmly and
then release.
Stop symbol is displayed.
Hill Start Control is activated.
To turn off Hill Start Control,
actuate brake lever 1 again.
Stop symbol disappears.
Alternatively, drive off in 1st or
2nd gear.
NOTICE
Hill Start Control is automatically
deactivated when driving off.
4
79
z