Electronic Chassis And Suspension; (Esa); Adjustment (Esa) - BMW S 1000XR 2018 Rider's Manual

has not been completed, it be-
4
gins to flash.
Release button 1 within two
56
seconds.
DTC indicator light remains
off or continues to flash.
DTC activated.
Electronic chassis and
suspension adjustment

(ESA)

z
with Dynamic ESA
Setting suspension
compliance
Switch on ignition (
Spring preload is displayed in
the multifunction display in area
1, and damping is indicated in
area 2.
To set the damping rate:
Repeatedly press button 3
briefly until desired setting is
displayed.
OE
NOTICE
The damping cannot be adjusted
while the motorcycle is being
43).
ridden.
The following settings are avail-
able:
ROAD: Normal damping
DYNAMIC: Sporty,
performance-oriented damping
To set the spring preload:
Start engine ( 75).
Press and hold button 3 in
each case until desired set-
ting is displayed.
NOTICE
The spring preload cannot be
adjusted while the motorcycle is
being ridden.
The following settings are avail-
able:
One-up
One-up with luggage
Two-up (with luggage)
Wait for the adjustment rou-
tine to finish before starting off
again.
If the button 3 is not pressed
for an extended period, the