14.1
Removing the front wheel
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
Remove screws
the side.
–
Remove screw
hole.
–
Loosen screw
–
Unscrew screw
screw to push the wheel spindle out of the axle clamp. Remove
4
screw
.
Warning
Danger of accidents Reduced braking effect caused by
damaged brake discs.
–
Always lay the wheel down in such a way that the
brake discs are not damaged.
–
Holding the front wheel, withdraw the wheel spindle. Take the
front wheel out of the fork.
V00690-10
1
, take off reflector and push the fender to
2
and pull wheel speed sensor
4
5
and screws
.
4
about 6 turns and press your hand on the
WHEELS, TIRES 14
p. 100)
p. 101)
3
out of the
147