KTM F5003R1 2018 Owner's Manual page 156

14 WHEELS, TIRES
154
–
Pull rear wheel back and mount wheel spindle
ers and chain adjusters
Info
Mount left and right chain adjusters
position.
–
2
Mount nut
–
Ensure that the chain adjusters lie flat on the screws and
tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
Nut, rear wheel spin-
dle
–
Position wheel speed sensor
tighten screw
E00642-11
Guideline
Screw, wheel speed
sensor holder
4
.
, but do not tighten it yet.
2
.
M14x1.5
5
in the drill hole. Mount and
6 .
M6
3
with wash-
4
in the same
B
.
90 Nm (66.4 lbf ft)
8 Nm (5.9 lbf ft)