Table of Contents
Advertisement
Box Bottom & Front Panel Installation
Set the Bottom Panel (Item #2) onto the Tilt Base Frame Assembly (Item #1) aligning the mount holes of the Bottom
Panel to those of the Tilt Base Frame Assy, refer to Figure A. Next, Position the Front Panel (Item #3) upright and on
top of the Bottom Panel. Align the bottom front set of mount holes of the Front Panel to those on the Bottom Panel,
refer to Figure B.
Loosely secure the Front Panel by using (4) 5/16"-18 x 3/4" Carriage Bolts (Item #4) and (4) 5/16"-18 Flange Nuts
(Item #5), refer to Figure B. Keep hardware relatively loose for the next step.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Figure B
8
Advertisement
Table of Contents
