Table of Contents
Advertisement
Jack Stand Assembly & Installation
The following procedure is the same for both Jack Stand configurations: P#(A2332) - Jack Stand Assy / Jack Foot or
P#(A2333) - Jack Stand Assy / Caster Wheel.
First, install the A-Frame Jack (Item #2) to the top of the Jack Mount Bracket (Item #1) by using (3) 3/8"-16 x 1"
Carriage Bolts (Item #4) and (3) 3/8"-16 Ny-Flange Lock Nuts (Item #5). Then install the Jack Caster Wheel (Item #3)
to the A-Frame Jack. See Figure A.
Once the Jack is assembled to the Jack Mount Bracket, install the Left Mount Support Bracket (Item #2) to the Jack
Mount Bracket by using (2) 3/8"-16 x 1" Carriage Bolts (Item #4) and (3) 3/8"-16 Ny-Flange Lock Nuts (Item #5). See
Figure B. Repeat the same process for the Right Mount Support Bracket (Item #3).
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Figure B
29
Advertisement
Table of Contents
