Peco Estate 795001 Operator's Manual page 30

Jack Stand Assembly & Installation (Cont.)
The Jack Mount Kit (Item #1) in Figure D is part of the Jack Stand Assy for both configurations previously mentioned,
refer to page 29.
First, align the mount holes of the Jack Mount Kit (Item #1) to those located on the Base Frame Cross Support of the
Base Frame Assembly. See Figure C & Figure D.
Install the Jack Stand Assy to the Base Frame Cross Support by using (2) 3/8"-16 x 1" Carriage Bolts (Item #2) and
(2) 3/8"-16 Ny-Flange Lock Nuts (Item #3) on the top of the Jack Stand Assy and another set to the front of the Jack
Stand Assy. Refer to Figure D below.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure C
Figure D
30
Base Frame
Cross Support
Jack Mount Holes