Wand Kit Installation - Peco Estate 795001 Operator's Manual

Wand Kit Installation

Pasture Vac Unit Instructions
Install one end of the 6" Hose over the Blower Cone (Item #1) by using (1) 6" Hose Clamp (Item #2). Secure the other
end over the Nose Cone of the Wand Kit by using (1) 6" Hose Clamp (Item #2). Refer to Figure A.
Once installed, the 6" Hose can be stored by wrapping it around the Hose Hanger (Item #3) as shown in Figure A.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
33