Troubleshooting - Peco Estate 795001 Operator's Manual

Collection System Performance
Problem
Abnormal Vibration
Reduced collection system
performance
Blower and hoses plugging too
frequently
Debris blowout
Impeller doesn't rotate freely
50

Troubleshooting

Possible Cause
— Cutting blades are bent or
unbalanced
— Loose blower pulley or pulley
assembly
— Impeller blade out of balance
— Low engine speed
— Plugged screen
— Loose belt
— Full collection bags
— Collection bags are too full
— Low engine speed
— Grass is too wet
— Grass is too long
— Ground speed is too fast
— Worn belt
— Loose belt
— Collection bags are too full
— Plug/clog in the collection
system
— Ground speed is too fast
— Plug in the blower housing
— Worn impeller blade
— Shaft bearings bad/failing
Corrective Action
— Install new cutting blade
— Tighten the pulley
— Contact dealer to replace
— Always operate collection
system at full throttle
—
Remove debris, leaves, or
grass clippings from the screen
— Replace/tighten belt
— Empty the collection bags
— Dump more frequently
— Always operate collection
system at full throttle
— Cut grass when it is dry
— Cut the grass several times
— Drive slower at full throttle
— Replace belt
— Adjust the pulley and tighten
belts
— Dump more frequently
— Clean the collection system
— Drive more slowly at full
throttle
— Clean the blower housing
— Contact dealer to replace
— Contact dealer to replace
2017 (v1.0)