Table of Contents
Advertisement
Mount Arm / Receiver Tube Assembly
& Exhaust Shield / Top Installation
Figure A
First, place (5) Grade 5 3/8"-16 x 3-1/2" HHCS (Item #3)
into the bolt holes of both the Top & Lower Mount
Brackets, refer to Figure A. Then, position and place the
Receiver Tube Assy / Mount Arm (Item #1) between the
Mount Brackets and bolts. Next, align and position the
Exhaust Shield / Top (Item #2) under the Lower PTO
Mount Bracket as shown in Figure A. Finally, secure the
Receiver Tube Assy / Mount Arm & Exhaust Shield / Top
by fastening (5) 3/8"-16 Ny-flange Lock Nuts (Item #4) to
the (5) Grade 5 3/8"-16 x 3-1/2" HHCS (Item #3). Refer
to Figure A.
Note: Some parts and part features have been hidden
from view for visual clarity.
Exhaust Shield / Bottom Installation
Position the Exhaust Shield / Bottom (Item #2) below and over the Exhaust Shield / Top (Item #1) as shown in Figure
B. Align the bolt holes of the Top & Bottom Exhaust Shields and secure them together by using (4) 1/4"-20 x 1/2"
Thread Cutting Screws (Item #3). Refer to Figure B.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure B
Figure C
14
Advertisement
Table of Contents
