Table of Contents
Advertisement
Screen Frame Assembly Installation
Remove the (2) 5/16"-18 x 1" Carriage Bolt (Item #2) and (2) 5/16"-18 Flange Nuts (Item #3) that were used to secure
the top of the (2) Diagonal Rails from the previous step. Once removed, position the Screen Frame Assembly (Item
#3) towards the rear aligning the rear (2) mount holes to the mount holes of the Diagonal Rail. Secure the Screen
Frame Assy relatively loose by using the previously removed hardware along with an additional (2) 5/16"-18 x 1"
Carriage Bolt, (2) 5/16"-18 Flange Nuts, (4) 1/4"-20 x 5/8" Carriage Bolts (Item #4) and (4) 1/4"-20 Flange Nuts (Item
#5), refer to Figure A.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Side Panel
Diagonal
Rail
12
Advertisement
Table of Contents
