Oki MC851+ User Manual page 55

FEATURE OPTION
Network Network
Menu Setup
TCP/IP Disable, Enable
IP Version IPv4, IPv4 + IPv6,
IPv6
NetBEUI Disable, Enable
NetBIOS over Disable, Enable
TCP
NetWare Disable, Enable
EtherTalk Disable, Enable
Frame Type Auto, 802.2, 802.3,
ETHERNET II, SNAP
IP Address Set Manual, Auto
IPv4 address xxx.xxx.xxx.xxx
Configuring your machine... > 55
DESCRIPTION
Enables or disables this network
protocol.
Set up the IP version.
Display condition: TCP/IP protocol
must be enabled.
IPv6 can be set only using Telnet.
Enables or disables this network
protocol.
Enables or disables this network
protocol.
Display condition: TCP/IP protocol
must be enabled.
IP version must be IPv4 or
IPv4+IPv6.
Enables or disables this network
protocol.
Enables or disables this network
protocol.
Selects the Ethernet MAC layer
frame type.
Display condition: Netware must
be enabled.
Specifies whether IP address
allocation is automatic (DHCP) or
manually assigned.
Display condition: TCP/IP protocol
must be enabled.
IP version must be IPv4 or
IPv4+IPv6.
Current assigned IP address.
To change, enter the address using
the numerical keypad. Press Enter
to register new address.
Display condition: TCP/IP protocol
must be enabled.
IP version must be IPv4 or
IPv4+IPv6.