Oki MC851+ User Manual page 52

FEATURE OPTION
Print Setup PCL Setup
(cont.) (cont.)
IBM PPR
Setup
A4 Print Width 78 Column, 80
Column
White Page Skip OFF, ON
CR Function CR, CR+LF
LF Function LF, LF+CR
Print Margin Normal, 1/5 Inch, 1/
6 Inch
True Black OFF, ON
Pen Width OFF, ON
Adjust
Tray ID# Tray 2:
01~05~59
Tray 3:
01~20~59
MP Tray:
01~04~59
Character Pitch 10 CPI, 12 CPI, 17
CPI, 20 CPI,
PROPORTIONAL
Font Condense 12CPI~20CPI,
12CPI~12CPI
Character Set SET-1, SET-2
Symbol Set IBM 437
Letter 0 Style Disable, Enable
Zero Character Normal, Slashed
Line Pitch 6 LPI, 8 LPI
White Page Skip OFF, ON
Configuring your machine... > 52
DESCRIPTION
Sets the number of columns
subject to Auto LF with A4 paper in
PCL. This is the value when Auto
CR/LF Mode is set to OFF with the
10CPI character.
Selects whether blank pages are
printed or not.
Selects whether a received
carriage return character (0Dh)
also causes a line feed.
Selects whether a received line
feed character (0Ah) also causes a
carriage return.
Sets the non-printable page area.
Normal is PCL compatible.
Selects whether black image data
is printed using black toner (True
Black ON) or 100% CMY. (Valid in
PCL emulation mode only.)
The thinnest line width in PCL, a 1-
dot line, may look broken.
ON: when the thinnest line width
is specified, line width is
emphasized to look wider.
OFF: the line appears as specified.
Sets the number to specify Tray 2,
Tray 3, and MP Tray for the paper
feed destination command in
PCL5e emulation.
Specifies character pitch in IBM
PPR emulation.
Specifies 12CPI pitch for Condense
Mode.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces
9BH with letter o and 9DH with a
zero
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Selects whether blank pages are
printed or not.