Oki MC851+ User Manual page 40

Admin Setup
NOTE
The Admin Setup option is blocked by a password. Refer to
configuration information" on page
FEATURE OPTION
Copy Setup Default
Settings
29.
Doc. Type Doc. Type:
Text, Text&Photo,
Photo, Extra Fine
Removal for
Background & Show-
Through (sTHR):
Auto, OFF, 1(Low),
2, 3, 4, 5(High),
sTHR
Density -3, -2, -1, 0, +1, +2,
+3
Zoom Auto, 100%
Sort OFF, ON
Margin OFF, ON
EdgeErase OFF, ON
EraseCentr OFF, ON
DuplexCopy Copy Method:
OFF, 1->2 sides, 2-
>2 sides, 2->1 side
Doc. Direction:
Binding
Right&Left, Top
Mixed Size OFF, ON
Configuring your machine... > 40
"Pre-
DESCRIPTION
Allows you to specify the type of
images on the document.
Allows you to block out the colour
background of the image
(assuming document has a colour
background) - such that the
background colour is not printed.
Use Show-Through when copying
documents that are printed on
both sides (for example
newspaper). This function
removes the reverse image and
characters.
Adjust density
Darker: Enhance image sharpness
and colour.
Lighter: Reduce hue and colour.
Specify zoom option.
Specify how to output multiple-
page/multiple-copy jobs.
Adjust the top and left margin
settings using the arrow buttons.
Front & Back input range:
-25~0~+25mm (1mm/Step)
-1.0~0~+1.0in (0.1in/Step)
Adjust the width settings using the
arrow buttons.
Input range:
05-50mm (1mm/Step)
0.2~2.0in (0.1in/Step)
Adjust the width settings using the
arrow buttons.
Input range:
01-50mm (1mm/Step)
0.1~2.0in (0.1in/Step)
Allows you to define simplex or
duplex and the binding orientation.
Allows you to load originals of
same width but different length in
the ADF.
When enabled, the tray setting is
automatic, you cannot specify a
tray manually.