Table of Contents
Advertisement
Network PT Dome Camera·Quick Start Guide
2.1 Ceiling Mounting
Steps:
1. Stick the supplied drill template on the ceiling.
2. Drill the cable hole and screw holes according to the drill
template.
3. Hammer the expansion plugs to the screw holes.
4. Rotate the adapter plate counterclockwise on the bottom of the
camera to remove the adapter plate.
5. Align the adapter plate with the drilled screw holes, and fix the
adapt plate with the expansion screws.
Make sure the "FRONT" sign on the adapter plate is align with the
one on the drill template.
FRONT
1
Drill Template
Hole A: for cables routed through the ceiling
Screw hole 1: for Mounting Base
A
Figure 2-1
Drill Template
15
1
1
Advertisement
Table of Contents
