HIKVISION UD04331B Quick Start Manual page 17

Network PT Dome Camera·Quick Start Guide
6. Route the cables through the cable hole and connect the
corresponding cables including power cable, network cable, alarm
cables, and audio cables.
7. Align the notches on the camera with those on the adapter plate,
and rotate the camera clockwise to secure the camera with the
adapter plate.
8. Power on the camera, visit the camera via web browser, and
adjust the surveillance angle via the PTZ interface. You can adjust
the pan angle from -90° to +90°, and adjust the tilt angle from 0° to
75°.
OPEN
Figure 2-4 Connect the Cables
17
LOCK