GYS Batium 15/12 Manual page 8

Hide thumbs Also See for Batium 15/12:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
Translation of the original instructions
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-
Do not leave a charging battery unattended for a long time
Acid projection hazard!
• Wear safety goggles and protective gloves.
• If your eyes or skin come into contact with battery acid, rinse
Connection / disconnection:
• Disconnect the power supply before connecting/disconnecting
• The terminal of the battery that is not connected to the car
• After the charging process, disconnect the battery charger from
Connection:
• This device must be connected to an earthed power supply.
• This machine is fuse-protected.
• Connection to the mains must be made according to the nation-
Maintenance:
• If the power supply cable is damaged, it must be replaced
• Service should be performed by a qualified person.
• Warning! Always remove the power plug from the wall socket
• If the internal fuse is blown, it must be replaced by the
• Regularly take off the cover and remove dust with an air gun.
• Under no circumstances should solvents or other aggressive
8
• Clean the device's surfaces with a soft, dry cloth.
BATIUM 7/12 • 7/24 • 15/12 • 15/24
circuiting.
the affected part of the body with plenty of water and seek
immediate medical assistance.
the device to/from the battery
frame must be connected first. The other connection must be
made on the car frame, far from the battery and the fuel line.
The battery charger must be connected to the power supply
network.
the power supply network and remove the connector from the
car frame and then the connector from the battery, in this order.
al installation regulations.
by the manufacturer, its service agent or an equally qualified
person.
before carrying out any work on the device.
manufacturer, its after-sales service or an equally qualified
person.
Take the opportunity to have a qualified person check the
electrical connections with an insulated tool.
cleaning agents be used.
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents