Master Reset - Mercury SmartCraft Systems Monitor Operation Manual

You can return the gauge back to factory presets through the Master
Reset command.
IMPORTANT: Performing a master reset will reset the unit back
to all factory defaults, thus eliminating
calibrations performed during set up of product.
1. Hold in
see the word "dFLt". Let go of the buttons.
2. Immediately press and hold in
unit counts down to zero "0".
3. The "SEt" message flashing on the screen indicates that the
unit has been reset to factory defaults.

MASTER RESET

and for approximately 12 seconds. You will
any installation
and again until the
6