Mercury SmartCraft Systems Monitor Operation Manual page 29

25 Percent
4. Add the displayed amount of fuel to the fuel tank.
5. Press the
vance to 50% setting.
50 Percent
6. Add the displayed amount of fuel to the fuel tank.
7. Press the
vance to 75% setting.
CAL 2 CALIBRATION
Gal
Fuel to Add
button to save. Press the
Gal
Fuel to Add
button to save. Press the
Tank 2 Calibration 25%
Setting
Adding the amount of fuel shown
will raise fuel tank level to 25 per-
cent.
NOTE :The quantity of fuel to add
is determined by the fuel tank ca-
pacity number entered.
Tank 2 Calibration 50%
Setting
Adding the amount of fuel shown
will raise fuel tank level to 50 per-
cent.
NOTE:The quantity of fuel to add
is determined by the fuel tank ca-
pacity number entered.
27
button to ad-
button to ad-