Front Baffle Installation (48" Deck); Front Baffle Installation (54" Deck) - Peco 28120903 Operator's Manual

Front Baffle Installation (48" Deck)

To avoid personal injury:
- Disengage the PTO, stop the engine, remove the key and wait for all moving parts to stop
- Never operate the mower without a discharge cover or grass-catcher boot installed.
1. Remove the discharge cover by removing the cotter
pin and slide the pin out.
2. Acquire adequate access to the bottom of the mower
deck by raising the mower deck to the "carry" position.
3. Install the Front Baffle Plate 2 using the (2) existing
carriage bolts and Ny-Flange Locknuts.
Fully Tighten both fasteners.
(1) Front Baffle Plate 2 P#(B0929)
(2) M8 x 16 square neck bolt
(3) M8 Flange Lock Nut

Front Baffle Installation (54" Deck)

! CAUTION
1. Remove the discharge cover by removing the cotter
pin and slide the pin out.
2. Fasten the 2 Front Baffle Plates together using (2)
5/16"-18 x 3/4" Carriage Bolts with (2) Ny-Flange
Locknuts.
Fully tighten both fasteners.
(1) Front Baffle Plate 2 P#(B0929)
(2) Front Baffle Plate P#(B0928)
(3) Carriage Bolt 5/16"-18 x 3/4" P#(K1142)
(4) Ny-Flange Lock Nut 5/16"-18 P#(K2516)