Pto Mount Plate Installation - Peco 28120903 Operator's Manual

PTO Mount Plates Installation
First, install the Right PTO Mount Plate P#(B2256) to the Top & Lower Right Mount Plates by using the previously
installed (1) 3/8-16" x 1" Carriage Bolt P#(K1182) and (1) 3/8"-16 Ny-Flange Locknut P#(K2038) along with another
set of (1) 3/8-16" x 1" Carriage Bolt and (1) 3/8"-16 Ny-Flange Locknut. Be sure the bolt heads are oriented facing the
mower for an easier installation.
Then, secure the Left PTO Mount Plate P#(B2255) to the Top & Lower Right Mount Plates by using (2) 3/8-16" x 1"
Carriage Bolts P#(K1182) and (2) 3/8"-16 Ny-Flange Locknuts P#(K2038). Refer to Figure A.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Finally, position the PTO Stop Plate P#(B0733) between the Left & Right PTO Mount Plates. Align all four of the
Mount holes and secure the PTO Stop Plate by using (4) 1/4"-20 x 3/4" HHCS P#(K1222) and (4) 1/4"-20 Ny-Flange
Locknuts P#(K2014). Refer to Figure B.
Tighten all hardware at this time.
Figure B
12
Left PTO Mount
Plate P#(B2255)
PTO Stop Plate
P#(B0733)
Right PTO Mount
Plate P#(B2256)
Prev Secured
Hardware (pg. 11)
Secure on each side by using:
(2) 1/4"-20 x 3/4" HHCS P#(K1222) and
(2) 1/4"-20 Ny-Flange Locknuts P#(K2014)