Pto Mount Plate Component Installation - Peco 06131512 Operator's Manual

2-4 PTO Mount Plate Component
Installation
PTO Drive Models Only
Secure the PTO stop plate P#(B0736) to the left PTO
mount plate P#(B0868) and right PTO mount plate
P#(B0869) using (4) 1/4"-20 x 3/4" HHCS P#(K1222)
and (4) 1/4"-20 nylon flange locknuts P#(K2014). Leave
the hardware finger tight until all of the PTO mount plate
components are installed. Refer to Figure 2-4a.
(2) 1/4"-20 x 3/4"
Hex Bolts
Secure the left and right PTO mount plates to the right
frame bracket using (1) 3/8"-16 x 1" HHCS P#(K1191)
and (1) 3/8'-16 nylon flange lock nut PER BRACKET.
Secure the bottom sections of the left and right PTO
mount brackets using (2) 5/16"-18 x 1" HHCS P#(K1154)
and (2) 5/16"-18 nylon flange locknuts P#(K2516) from
the right frame bracket installation. Tighten all PTO
component hardware at this time. Refer to Figure 2-4b.
Figure 2-4a
Left PTO
Mount Plate
Figure 2-4b
Right Frame
Bracket
9
PTO Stop
Plate
(4) 1/4"-20
Locknuts
(2) 3/8"-16
Locknuts
Left PTO
Mount Plate
(2) 5/16"-18 x 1"
Hex Bolts
(2) 5/16-18
Locknuts
Right PTO
Mount Plate
(2) 1/4"-20 x 3/4"
Hex Bolts
Right PTO
Mount Plate
(2) 3/8"-16 x 1"
Hex Bolts