Table of Contents
Advertisement
f The estimated runtime is a time for the luminance to decrease to half.
f If the runtime exceeds 20 000 hours, replacement of the components inside the projector may be required. Consult your dealer for details.
Setting [MAX LIGHT OUTPUT LEVEL]
Adjust the maximum level to correct screen brightness according to the changes in brightness of the light source.
1)
Press as to select [OPERATION SETTING].
2)
Press the <执行> button.
f The [OPERATION SETTING] screen is displayed.
3)
Press as to select [MAX LIGHT OUTPUT LEVEL].
4)
Press qw to adjust.
Operation
Press w.
Press q.
5)
Press as to select [APPLY].
6)
Press the <执行> button.
f The confirmation screen is displayed.
7)
Press qw to select [OK], and press the <执行> button.
Note
f When [OPERATING MODE] is set to [NORMAL], [ECO], [QUIET1], or [QUIET2], the item of [MAX LIGHT OUTPUT LEVEL] cannot be
adjusted.
f The brightness is corrected using this setting when the [PROJECTOR SETUP] menu → [BRIGHTNESS CONTROL] → [BRIGHTNESS
CONTROL SETUP] → [CONSTANT MODE] is set to [AUTO] or [PC].
f The [MAX LIGHT OUTPUT LEVEL] setting does not return to factory default setting even if the [PROJECTOR SETUP] menu →
[INITIALIZE] → [ALL USER DATA] is executed.
Setting [LIGHT OUTPUT]
Adjust the brightness of light source.
The [LIGHT OUTPUT] setting is synchronized with the [PROJECTOR SETUP] menu → [LIGHT OUTPUT]. The
most recent setting is reflected in both items.
1)
Press as to select [OPERATION SETTING].
2)
Press the <执行> button.
f The [OPERATION SETTING] screen is displayed.
3)
Press as to select [LIGHT OUTPUT].
4)
Press qw to adjust.
Operation
Press w.
Press q.
5)
Press as to select [APPLY].
6)
Press the <执行> button.
f The confirmation screen is displayed.
7)
Press qw to select [OK], and press the <执行> button.
Note
f [LIGHT OUTPUT] can be adjusted individually for each setting item of [OPERATING MODE].
f In such a case when configuring multiple screens with multiple projectors, uniformity of brightness between multiple screens can be
obtained by adjusting [LIGHT OUTPUT].
122 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Increases the maximum level of brightness correction.
Decreases the maximum level of brightness correction.
Brightness
The screen becomes brighter.
The screen becomes darker.
Adjustment
Adjustment
Runtime (estimate)
The runtime becomes shorter.
The runtime becomes longer.
Range of adjustment
8.0 % - 100.0 %
Range of adjustment
8.0 % - 100.0 %
Advertisement
Table of Contents
