Table of Contents
Advertisement
r Control panel
1
Power on <b> button
Sets the projector to projection mode when the <主电源> switch
on the projector is set to <开> and the power is turned off
(standby mode).
2
Power standby <v> button
Sets the projector to the state where the projector is turned off
(standby mode) when the <主电源> switch on the projector is
set to <开> and in projection mode.
3
<RGB1> button
Switches the input to RGB1.
4
<RGB2> button
Switches the input to RGB2.
5
<DVI-D> button
Switches the input to DVI-D.
6
<HDMI> button
Switches the input to HDMI.
7
<DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8
<SDI> button
Switches the input to SDI.
Chapter 1 Preparation — About your projector
1
2
3
4
5
6
7
8
9
10
11
12
13
14
9
<菜单> button
Displays or hides the main menu. (x page 71)
Returns to the previous menu when a sub-menu is displayed.
If you press the <菜单> button on the control panel for at least
three seconds while the on-screen display is off (hidden), the
on-screen display is turned on.
10 <镜头> button
Adjusts the focus, zoom, and lens shift.
11 <执行> button
Determines and executes an item in the menu screen.
12 <快门> button
Used to temporarily turn off the image. (x page 67)
13 asqw selection buttons
Used to select an item in the menu screen, change the setting,
and adjust the level.
Also used to enter a password in [SECURITY] or enter
characters.
14 <自动设置> button
Automatically adjusts the image display position while the
image is projected. [PROGRESS] is displayed during the
automatic adjustment. (x page 68)
ENGLISH - 25
Advertisement
Table of Contents
