Version Information; Statistics - Wolf E Series Technical & Service Manual

Electronic Control System

Version Information

1. Enter into Version Info by first entering Diagnostics Mode and choosing the Version Info from the Service Menu
(Key Press of 4).
2. Initial Entry will display "Version Info" in Upper Information line.
3. Lower Information line will display each of the following and can be switched using the ENTER key.
a. RMA HV
b. RMA LV
c. UM
d. Cfg CRC
e. DATALOGGER VERSION
f. S/N
4. Exiting the Version Info screen can be done in the following ways:
a. CLEAR key press from the RMA HV display will return to the initial Service Menu.
b. OVEN OFF (LOWER OFF, UPPER OFF) will exit diagnostics mode and return the display to TODD.

Statistics

1. Enter into Statistics by first entering Diagnostics Mode and choosing Statistics from the Service Menu
(Key Press of 5)
2. Throughout the duration of statistics, the Upper Information Line will display: "Statistics".
3. For the case of a double oven, the upper oven will be addressed until the "UPPER/LOWER" key is pressed.
Pressing this key at any time during Statistics will toggle the selected cavity and set the state to the "Last 5 func-
tions" initial menu.
NOTE: There is no upper/lower key on single ovens.
4. The ENTER key will cycle through the first level of the statistics.
5. To see the last 5 functions of the unit, user will press the "SET TIMER" key from the "Last 5 functions" initial
menu and the details of each mode will be displayed as the user chooses. Once in the level that displays the
data, the ENTER and CLEAR keys will operate per their default definitions.
6. If the data record for one of the "last 5 modes" has a bad checksum or is empty, "No Mode" will be displayed in
place of the mode name, and the data for all items will be 0 if viewed.
7. To see the total # of cycles of each mode, when user is on the "Total # of each individual..." screen, any key
press of the mode keys will display the # of cycles for that mode. Once in the level that displays the mode count,
the ENTER and CLEAR keys will operate per their default definitions. In addition, pressing one of the mode
keys from this level will jump directly to that modes' display.
8. To exit mode
a. LOCK key will bring user back to the initial Service Menu.
b. The OVEN OFF (UPPER OFF/LOWER OFF) keys will also exit mode and return the display to TODD
screen.
c. Or a CLEAR key press from the initial state (unit operation time) will return user back to the initial Service
Menu.
E E - - S S e e r r i i e e s s W W a a l l l l O O v v e e n n
E E - - S S e e r r i i e e s s W W a a l l l l O O v v e e n n
3-28