Table of Contents
Advertisement
44
Installation Example - Build-In with Horizontal Termination
The framing, facing, and other building materials depicted below are for example only. Refer to local
building codes for framing, facing, and insulating requirements in your area.
Side View
See "Vent Termination"
NOTE FOR 2 x 4 (51mm X 102mm) EXTERIOR
WALLS:
When installed with a 2x4 (51mm X 102mm)
exterior wall, the termination may not fit flush against
the exterior wall. You may wish to place framing
around the termination to fill the gap.
Top View
NOTE:
1/2'' (13mm) Clearance to
sides and back of fireplace.
© Travis Industries
Installation
for full requirements.
Horizontal Termination*
4'' (102mm) Section*
(make sure all vent clearances are met)
(for qualified installers only)
SIDE OF FIREPLACE
Firestop
Insulation
NOTE: If required to use drywall inside
the firebox enclosure, make sure to alter
the framing accordingly.
Drywall
Optional Tile
8/17/2018 - 1482
Drywall
Optional Tile
864 31K
Advertisement
Table of Contents
