Table of Contents
Advertisement
Facing Overview
Upgrade faces are available for this fireplace and may influence facing installation. Consult with your
Travis Dealer if you are using an upgrade face.
Optional non-combustible facing may be installed on the fireplace. Use the guidelines below to determine
the location (also see the following pages for detailed diagrams.
Tile Line
Any non-combustible facing under 1" (25mm) thick (see "Thin Facing" on page 38).
Masonry Line
Any non-combustible over 1" (25mm) thick (see "Thick Facing" on page 40).
Hearth Line
Non-combustible hearth/facing should be installed up to this location (1" (25mm) above the base
of the fireplace). The fireplace may be raised to accommodate thicker hearth materials.
Optional Faceplates
Upgrade faces are available for this fireplace that may influence facing installation. Refer to the face
installation instructions for face sizing and installation considerations.
Name
FPX Artisan, Classic, Fr Ctry
Legacy Face
Shadowbox
© Travis Industries
Installation
(for qualified installers only)
Height
Width
35.75" (908mm)
41" (1041mm)
35.75" (908mm)
41" (1041mm)
38.0625" (967mm)
50" (1270mm)
8/17/2018 - 1482
NOTE: The hearth or facing can extend no
greater than 1'' (25mm) above the base of the
fireplace. The fireplace may be raised to
accommodate thicker hearth materials.
Notes
45-3/4" (1162mm) Radius – May fit over top of tile facing
May fit over top of tile facing
Face extends 1" below base of fireplace
37
864 31K
Advertisement
Table of Contents
