Installation Example - Build-In With Horizontal Termination - FireplaceXtrordinair 564 GSR2 25K Deluxe Installation Manual

Installation Example - Build-In with Horizontal Termination


The framing, facing, and other building materials depicted below are for example only. Refer to local
building codes for framing, facing, and insulating requirements in your area.
Side View
See "Vent Termination"
* Travis Ind. MIn. Vent Kit (SKU 9890016 8)
Includes a 4" (102mm) section and horizontal
termination.
NOTE FOR 2 x 4 (21mm X 102mm)EXTERIOR
WALLS:
When installed with a 2x4 (51mm X102mm)
exterior wall, the termination may not fit flush
against the exterior wall. You may wish to place
framing around the termination to fill the gap.
Top View
NOTE:
1/2" (13mm) Clearance to
sides and back of
fireplace.
© Travis Industries
Installation
for full requirements.
Wall Thimble
Horizontal Termination*
4" (102mm) Section*
(for qualified installers only)
SIDE OF FIREPLACE
Wall Thimble
Insulation
NOTE: If required to use drywall inside
the firebox enclosure, make sure to alte
the framing accordingly.
Drywall
Optional Tile
3/5/2019 - 1491
Drywall
Optional Tile
IDB01123
564 GSR2 25K
45