Operating Instructions Technical Specifications - Fieldmann FDEB 200431-E Manual

Certain cleaning agents and solvents are harmful to plastics and other
insulated parts. Some of these include gasoline, turpentine, lacquer thinner,
paint thinner, chlorinated cleaning solvents, ammonia and household
detergents containing ammonia.
Never use flammable or combustible solvents around tools.
Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk
of injury.
If the tool does not work properly, return the tool to a service facility for
repairs.
LUBRICATION
Your tool has been properly lubricated and is ready to use. It is
recommended that tools with gears be regreased with a special gear
lubricant at every brush change.
5. TECHNICAL SPECIFICATIONS
FINISHING SANDER
Nominal frequency and power
No-load speed:
Nominal power:
Acoustic pressure level:
Hand/arm vibration level
Acoustic power level
Insulation class
Weight
Pad sizeeter
Instructions Manual - language version only.
Amendments to text and technical parameters are reserved.
Changes in the text, design and technical specifi cations may change without prior
notice and we reserve the right to make these changes.keep it from turning as the
drill bit rotates.
ROTARY SANDER
Operating instructions | Technical specifications
230V/50Hz
430W
5000-13000rpm
77dB(A)
7,6 m/s
2
88dB(A)
II
2.1kg
125mm
15 EN
OPERATING INSTRUCTIONS